SEBO Release Button Cover for FELIX Premium and ET-1 Swivel Necks — Light Gray

Pressed thousands of times over a machine's life, the release button cap eventually wears smooth or cracks across its face. 2952HG is the light gray replacement, listed by SEBO for the FELIX Premium and the ET-1 power head, and used on swivel neck 2307HG.

Position 118 on the FELIX parts diagram identifies it, sitting directly after the release button and leaf spring at 117. A cap that has broken away leaves the button proud and unprotected, so grit finds its way into the mechanism and the action grows stiff. Fitting a new one restores a defined face for the thumb and a clean stop at the end of the press. Where the button underneath has also gone soft, the light gray button and spring assembly is 1737HG, and the complete light gray neck it lives in is 2307HG.

• Part number: 2952HG
• Colour: light gray
• Fits: FELIX Premium, and ET-1 power heads with or without the on/off switch
• Neck reference: swivel neck 2307HG
• Diagram position: 118 on the FELIX sheet
• Alternative finish: gray black cap 2952GS
• Related part numbers: 1737HG release button with leaf spring, 2951HG socket cover, 2945HG slide

It is a small moulding with an outsized effect on how the machine handles, and it is the first thing to replace when a SEBO FELIX Premium handle release stops feeling positive. Both finishes cover the same button and share position 118 on the parts list, so the suffix on the number is what separates them rather than anything you can see in the drawing. Fitting is quick with the neck already open, and doing it at the same time as the socket cover and slide saves taking the joint apart twice for parts that all live within two positions of each other. Genuine SEBO component from an authorized dealer. Ships in 2–5 business days.