SEBO 7 ft. Hose Assembly with Handle, Coupling and Retaining Ring for C1.1 and C2.1 (Gray Black)

Sold as one complete assembly, 6355AM replaces the hose, the handle on top of it, the machine-end coupling and the retaining ring in a single order. It measures 7 ft. and comes in the gray-black finish used on the SEBO C1.1 and C2.1.

Hoses fail from the inside out: a pinhole near the handle, a torn cuff at the coupling, a ring that no longer clamps. Chasing those one at a time rarely pays off, because a hose that has cracked once is usually brittle along its whole length. This assembly retires all four wear points together. If the hose itself is sound and only the joint at the handle has gone slack, the ring on its own is 6303GS in the same gray black — the identical component that arrives fitted inside this kit.

Everything that clips onto the handle carries straight over to the new one. The 22 in. extension wand 1084GS, crevice nozzle 1092GS and adapter 1766ST, which steps a 38 mm SEBO handle down to 1 1/4 in. non-SEBO attachments, all mate exactly as they did before. Inside the telescopic tube the catch is 6238ER, worth checking at the same time if the tube has started slipping under load.

• SKU: 6355AM
• Length: 7 ft.
• Finish: gray black
• Fitment: C1.1 and C2.1
• Supplied complete with: hose, handle, coupling and retaining ring
• Ring only: 6303GS
• Replace when: the hose leaks along its length, the cuff is split, or the handle is cracked

Genuine SEBO assembly supplied by an authorized dealer, shipping in 2–5 business days. A leaking hose is the most common reason a well-maintained canister feels weak with a fresh bag and clean filters, so it is worth ruling in or out before deeper work on the machine.