Carpet Pro Front Wheel Axle...
$6.99
Product details
Steering on the Titan T500 Cord Free comes down largely to how well the front wheel tracks, and that wheel rides on this axle, part B010-0001E.
Clean Max's ZM800 is listed for this same axle, and so are the Carpet Pro ZM-400 and CP-ULW alongside the T500. A quick check is to tip the machine back and spin the front wheel by hand; it should turn freely without wobble or scraping. Axles in this position see constant load from the machine's own weight plus whatever downward pressure comes through the handle, and over years of rolling across thresholds and floor transitions, the shaft can bend, wear at the bearing surface, or corrode enough to bind in its housing. Once that happens the wheel stops turning freely and instead drags or wobbles, which adds noticeable resistance to every pass and, on hardwood or tile, can leave a visible scuff trail. Because the front wheels also set how close the nozzle rides to the floor, a bent axle can throw off cleaning height even when nothing else about the machine has changed.
Replacing the axle is a wheel-off repair rather than anything deeper in the machine, and it restores the wheel to spinning freely on its original centerline.
- Part: B010-0001E front wheel axle
- Fits: Titan T500 Cord Free; Clean Max ZM800; Carpet Pro CP-ULW, ZM-400
- Function: supports and centers the front wheel beneath the nozzle
- Sign of failure: dragging, wobbling, or a wheel that no longer spins freely
Confirm your model against the fitment list before ordering, since front-wheel parts differ across the wider Carpet Pro and Titan upright range and this axle is listed only for the four models above.