SEBO Suction Unit for the BALANCE A1 — Blue

One diagram position, three part numbers: SEBO draws the BALANCE A1 suction unit at position 1 and then splits it by colour, and 95025BA is the blue one. It belongs on the blue A1, the machine SEBO catalogues as 95011AM.

This is the powered section of the vacuum rather than a component inside it. The motor lives here, and the rest of the machine is built outward from it: the cyclone unit 8820AM at position 4 and the motor protection filters 8850AM at position 3 clean the air before it arrives, the adapter 8860AM at position 6, suction tube 8831AM at position 9 and extension hose 8830AM at position 10 attach to the intake, and the charger 95021AM at position 8 supplies the pack sold as 95020SE. Nothing else on the sheet does its job without this assembly working.

It is a service item for real damage — a hard drop, a split housing, a motor section that no longer starts — so confirm the fault before ordering rather than after. If the housing is sound and only the cleaning has gone off, the roller and filter numbers above are the cheaper place to start.

Owners searching for a blue A1 body, a BALANCE A1 motor unit or plainly for SEBO 95025BA all arrive at this same assembly, and it is worth being exact about what that means. One complete suction unit is supplied, finished in blue. Rollers, filters, the dust container and the tube and hose set are catalogued under their own numbers and carry straight over from the machine being repaired.

• Fitment: SEBO BALANCE A1
• Shade: blue, matching the blue BALANCE A1 sold as 95011AM
• Drawn at: position 1, BALANCE A1 parts diagram, listed as the blue suction unit
• SEBO part number: 95025BA
• Same position, other finishes: gray 95025GA, magenta 95025MA
• Supplied as: one complete suction unit
• Genuine SEBO assembly, ships in 2–5 business days