SEBO Pile Adjustment Wheel for SOFTCASE CE12

Matching a SOFTCASE CE12 to the floor beneath it comes down to the pile adjustment, and 75121GS is the wheel an operator turns to make that adjustment. Set it for a long pile carpet and the brush is held higher, clear of the fibres; wind it down for a low pile runner or a hard floor and the brush comes closer to the surface where it can actually work.

The wheel does not act alone. SEBO's CE12 parts list shows the pile adjustment axle at position 146 and the slider for height adjustment at position 128, and a machine whose height setting drifts or refuses to change may have a fault in any of the three. Start with the wheel itself, since it is the component in the operator's hand and the one that cracks around its hub or wears its splines until it turns without taking the axle with it. A wheel that spins freely, clicks past its settings or has broken away at the boss is doing nothing for the machine.

Height set too high is the quiet fault here. The vacuum sounds normal, the bag fills slowly, and the brush is simply not reaching into the carpet. Restoring a wheel that holds its position brings back a repeatable setting rather than a guess.

• Part number: 75121GS
• Component: pile adjustment wheel
• Fits: SEBO SOFTCASE CE12 upright vacuum
• Function: sets brush height for the carpet pile or hard floor being cleaned
• Sold: each
• Works with: pile adjustment axle at position 146, height adjustment slider at position 128
• Genuine SEBO service part

Turn the new wheel through its full travel before closing the machine up, and confirm the brush actually rises and falls with it.

Searched as a SEBO pile adjustment wheel, a CE12 carpet height dial or SOFTCASE CE12 brush height parts. Ships in 2-5 business days.