SEBO Microfilter Seal for C...
$8.00
Product details
A filter is only as good as the ring of rubber around it, which is why part 6034 belongs on the same order as the media rather than on a later one. SEBO lists it as the microfilter seal used across the C-series canisters.
It shuts the gap at the edge of the microfilter, obliging exhaust air through the media rather than around the shorter route at its edge. Once the seal has flattened, hardened or split, that bypass opens and the very dust the filter exists to trap goes straight back into the room. The signs are indirect: a fine film settling on furniture near where the machine is used, or a faint smell on the exhaust of a canister running a fresh bag. Nothing about the part looks wrong when the housing is opened, and that is precisely why it is skipped so often.
- Part number: 6034
- Fits: SEBO C1.1, SEBO C2.1 and SEBO C3.1 canister vacuums
- Role: seals the microfilter to its housing so no air slips past the media
- Filter it seals: microfilter 6191AM
- Frame that clamps it: 6003DG in dark gray, 6003GW in white
- Rest of the filtration set: exhaust filter 6033AM, service pack 6198AM
- Other seals catalogued for these canisters: 6186, 6187, 6306 and foam seal 6128
Fit it onto a face that has been wiped clean and left dry, and give the media itself a look while the housing is apart. Because several seals are listed for this family under near-identical wording, order by number — that is the only thing separating them on paper. Common searches are SEBO microfilter seal, C1.1 filter gasket, and SEBO canister exhaust filter seal. Genuine SEBO part held by an authorized dealership, dispatched in 2–5 business days.
