Kirby Portable Handle Assem...
$18.99
Product details
Carrying a Kirby up a staircase puts the machine's full weight through one molded joint at the top of the handle. 201301 replaces that portable carry handle on the Generation 3 upright, a part shared with the Ultimate G.
The mounting points crack well ahead of a full break across the middle, and the early tell is a handle that flexes or clicks slightly under load rather than staying stiff. Keep lifting the machine on a handle already doing that and it can let go mid-carry, which turns a routine move into a dropped vacuum on the stairs.
Lift the machine partway and pause rather than carrying it in one continuous motion to check for this. A handle with hairline cracks at the mount gives a small amount right at the start of the lift that a sound handle will not.
Fitting the replacement is a straightforward swap. While the old one is off, inspect the mounting fasteners underneath, since a bolt that worked loose is a common reason the original handle cracked in the first place. Snug the new handle's fasteners down evenly rather than fully tightening one before starting the next, since uneven tightening can twist the handle slightly out of alignment and put it under the same stress that took out the original. Once reassembled, lift the machine by the handle alone before loading it onto stairs for real, and confirm there is no give anywhere along the joint. A handle that feels completely solid on that test is ready for regular use.
- Part: 201301 portable handle assembly
- Fits: Kirby Generation 3, Ultimate G
- Symptom: flexing or clicking handle, cracked mounting points
- Check alongside: mounting fasteners