Kenmore Charger Base - DS60...
$78.99
Product details
This charger base is the docking charger built for the Kenmore DS6028 stick vacuum, sold as part 561029103. A stick vacuum only earns its spot by the door if it is actually charged when you reach for it, and that comes down entirely to a charging unit delivering the right voltage and current every time the machine is set down on it.
Using a mismatched charger is one of the more common ways a stick vacuum battery gets damaged early, since off-spec current can overcharge or unevenly stress the cells inside the pack over repeated cycles. If your DS6028 no longer charges when docked, or never takes on any charge despite sitting squarely on the base, the charging unit is the first thing to test before assuming the battery has failed outright.
- Part: charger base, part 561029103
- Fits: Kenmore DS6028 stick vacuum
- Function: supplies charging power to the vacuum while docked
- Tip: rule out the wall outlet and the battery pack before blaming the base itself
It is worth isolating a base fault from a pack fault before ordering either part: if your base has a charge indicator, plug it into the wall on its own and note whether it shows life without the vacuum docked, since a base that powers up by itself but never charges a seated vacuum points to a connection or pack issue rather than the charging unit. Check the model label on the vacuum body and make sure it reads DS6028 before buying, since that is the one machine this base is listed for. Before ordering, it is also worth wiping down the charging contacts on both the base and the vacuum itself, since a film of dust or a bit of corrosion on those contacts can mimic a dead charger even when the internal electronics are fine. Set the vacuum onto the base and check that it seats fully flush rather than resting at an angle, since a base that does not sit level can leave the contacts touching only intermittently.