SEBO Central Vacuum Telescopic Wand for ET-1 and ET-2 Power Heads

Working height on a central vacuum is set by the wand rather than the hose, and part 6272CA is the SEBO telescopic tube built to sit between the hose handle and an ET power head. It extends to wherever your back is comfortable, locks there, and collapses again for the closet.

It fits the SEBO ET-1 and ET-2 power heads in both the switched and the unswitched builds. A wand carries the entire airstream from the head up to the hose, so its condition matters more than its appearance suggests. A dented tube leaks air along its length, a tired locking collar creeps shorter under the weight of the head, and a scored joint bleeds off suction quietly for as long as the machine runs.

What owners describe is weak pickup at the floor with a motor that sounds perfectly healthy, and the wand is one of the first things worth ruling out. Fitting a sound tube puts the seal back across the full run from head to hose, and the head starts lifting what it should again.

• Part: 6272CA telescopic wand for central vacuum systems
• Fits: ET-1 and ET-2 power heads, with or without switch
• Length: adjusts and locks anywhere across its telescopic range
• Related: 6272PI is the same wand supplied with a plastic tip
• Also useful: 2780AM, the adapter with 34 in. cord for running an ET head on central vacuum tubing
• Replace when: the tube is dented, the collar slips under load, or the joint leaks air

A wand is also the part most often damaged by something other than use. Wheeled over, stood on or dropped down a stairwell, it bends where the tube is thinnest and never seals properly again afterwards. Ordering the SEBO original matters here because the electrical path and the way the tube enters the ET head are both part of the design, not simply a question of diameter.

Genuine SEBO replacement, out the door in 2-5 business days.