SEBO Dusting Brush Clip Adapter Sleeve for AIRBELT K3 and E3 Wands

On a K3 or an E3 the dusting brush travels on the telescopic wand, held by clip 6694GS, and that clip only grips if the sleeve underneath it is the right diameter. Part 60238AD is that sleeve, cut for the 60237UC and 60241UC wands these two machines use.

Get it wrong, or leave a brittle old one in place, and the clip works loose until the brush ends up in a drawer rather than on the machine where it is wanted mid-job. Sleeves are small and easy to overlook, but they are the only thing holding an onboard tool where it can be reached without going back to the cupboard. SEBO draws the piece at position 37 of the AIRBELT K parts diagram, where it is listed as the brush adaptor.

Ordering the right one comes down to the wand, not the machine badge. Confirm the number printed on the telescopic tube first: 60237UC and 60241UC take this sleeve, while the earlier 6237ER tube fitted to other AIRBELT canisters takes 6668GS instead. The two look similar enough to be mixed up and different enough that the clip will not hold on the wrong one.

The reason to bother at all is convenience that is easy to underrate. A dusting brush carried on the wand is used; a dusting brush left in a cupboard downstairs is not. This SEBO brush adaptor sleeve is what keeps the tool where the hand reaches for it, and it is a two-minute job with nothing to unscrew.

• Part number: 60238AD
• Fits: SEBO AIRBELT E3 Premium and AIRBELT K3 PREMIUM
• Wands: 60237UC and 60241UC
• Works with: dusting brush mounting clip 6694GS
• Diagram: position 37, brush adaptor, AIRBELT K
• Not this one: 6668GS covers the 6237ER telescopic tube

Supplied as a genuine SEBO part by an authorized dealer. Ships in 2–5 business days.